 Annual Review 99 |
Technical Meetings and Conferences
1998/99
Technical Papers | International
Conferences and Seminars
Deep and Ultra Deep Water
Offshore Technology
Newcastle, 25-26 March 1999
"Keynote address: The challenges of developing a large
deepwater field"
Dr R B Inglis (Shell International Deepwater Services BV, The Netherlands) |
"Drilling and production technology.Living with slugs on floaters"
I Das (Cranfield University, UK), Dr C Wordsworth and G McNulty (CALTEC, UK) |
"Computer simulation of drilling and production in deep water"
S J Rowe (BMT FIuid Mechanics Limited, UK) |
"Exploitation of stranded gas reserves: options and solution
development"
G C Mackie, K W Hutchinson and D Wanless (Armstrong Technology, UK) |
"Floating production technology. Evolution of the production spar "
RS Glanville (Deep Oil Technology, Inc., USP) |
“Dynamic wind effects on FPSO 100-year response”
A McLeary (Lloyd's Register ofShipping, UK) |
“FPSO hull girder strength assessment methodology”
Dr Y Pu, Prof A Incecik (University of Newcastle upon Tyne, UK), N W Snedden (Shell UK
Exploration and Production), G Mackie and D Dunce (Armstrong Technology, UK) |
"Floatover decks for the spar floating production system "
J C Chao, J E Halkyard and J A Hinrichs (Deep OiI TechnoIogy Inc.,USA), B N Johnson
(Aker Marine Contractors Inc., USA), M R Zeringer (J Ray McDermott Inc.,USA), H M Thompson
and G N Beitch (Chevron Petroleum Technology Co, USA |
"Numerical simulation and model test requirements for deep water
developments "
Ir B Buchner (MARIN (Maritime Research Institute Netherlands) |
"Product management/risk assessment. Risk assessment of delays during
deep water pipe-laying "
Dr V M Trbojevic (EQE lnfernational Ltd, UK) |
| "Moorings and anchors. Polyester and steel mooring designs in the
Atlantic Margin" N Haug (Aker Engineering AS, Norway) and W Greiner (Aker
Engineering Inc., USA) |
| "Risers and pipeline technology.Update on the design of steel catenary
riser systems" S A Hatton (2H Offshore Engineering Ltd, UK) |
"Unbonded flexible pipe solutions for the ultra deep water
challenge"
J Tuohy (Wellstream-Halliburton Subse Solutions, UK) |
"Deepwater pipeline flooding and pigging without connection to a surface
vessel "
L graves (Copipe Systems Ltd, UK) |
"Moorings and anchors. Forces
and stability of a cylinder in the wake of an upstream cylinder"
W Wu, D S Huang and N Barltrop (University of Glasgow, UK) |
"Spectral analysis quality assurance in time-domain
mooring analysis"
Prof G E Hearn and M T Ali (University of Newcastle upon Tyne, UK) |
| "Risers and pipeline technology.Strength design of deepwater pipelines"Prof Y Bai, G Langford
and P Damsleth (J P Kenny A/S, Norway) |
"Use of non-metallic materials in low
cost flexible tubular systems"
Prof A G Gibson (University of Newcastle upon Tyne, UK) |
MarPower 99 Advanced Marine
Machinery Systems
with Low Pollution and High Efficiency
Newcastle, 25-26 March 1999
Keynote address: "Exhaust emission controls – the
future for the marine industry "
A A Wright (ABS Europe Ltd, UK) |
"Future marine machinery systems potential. The potential of gas turbines
with complex cycles"
Prof D Stapersma (Royal Netherlands Naval College (RNLNC, Den Helder), The NetherIands) |
"The potential of the turbocharged diesel engine."
H Grimmelius (Delft University of Technology, The Netherlands) and Prof D Stapersma
(Royal Netherlands Naval College (RNLNC, Den HeIder), The Netherlands) |
"Diesel engine exhaust gas emissions - research, assessment and
certification"
H-J Gotze, R Krapp, S Neddenien and E Ulrich (Germanischer Lloyd, Germany) |
"Some concept ideas of marine machinery systems"
O M Martens (Norwegian Marine Technology Research Institute (MARINTEK), Norway) |
"Secondary emission control methods. A report on field trials of a novel
wet scrubber for marine diesel engines "
Dr A Trivett, G MacDonald and Dr C;Trivett (Marine Energy Ltd, Canada) |
"Exhaust gas aftertreatment on medium-speed diesel engines"
U Hopmann (MaK Matoren GmbH & Co. KG, Germany) |
"Primary emission control methods.The Rolls-Royce/Allen 5000 series
engine - control of NOx with electronic fuel injection "
D A Gillespie and S G Mobbs (Rolls-Royce Power Engineering plc, UK) |
" Marine system simulation and control. Simulation of the overall ship
propulsion plant for performance prediction and control"
Prof N P Kyrtatos, P Theodossopoulos, G Theotokatos and N Xiros (National Technical
University of Athens, Greece) |
"A real-time simulation model of a high speed permanent magnet generator
directly coupled to a gas turbine "
M E Nillesen, Dr L J J Offringa (Eindhoven University of Technology, The Netherlands)
and Prof D Stapersma (Royal Netherlands Naval College (RNLNC, Den Helder), The
Netherlands) |
"Transient simulation of marine diesel engine systems by improved
characteristic cylinder map interpolation "
M Gerstle and G P Merker (Universitat Hannover, Germany) |
"Simulation study of some techniques to reduce pollutant emissions of
medium-speed diesel engines used for naval propulsion "
Dr X Tauzia, Dr J-F Hetet and Dr P Chesse (Ecole Centrale de Nantes, France) |
"Secondary emission control methods.
Application of a water scrubber for cleaning diesel engine
exhaust gases"
Dr P L Zhou and S Montgomery (University of Newcastle upon Tyne, UK) |
"Non-thermal plasma for marine diesels"
Lt Cdr G E Walters (Ships Support Agency, MOD(N), UK), Dr F Winterbottom, Dr R McAdams and
P Airey (AEA Technology, UK) |
"Primary emission control methods. Using the Miller process for marine diesel engines"
Dr E Codan (ABB Turbo Systems, Switzerland), H Fiedler (FMC Fiedler Motor Consulting, Germany)
and Prof Dr-Ing H Meier-Peter (Institut für Schiffsbetriebsforschung, Germany) |
"An evaluation of geared electric ship propulsion"
D A Hofmann (University of Newcastle upon Tyne, UK) and Lt M Rose (MOD(N), UK) |
"Marine system simulation and control. Intelligent marine system modelling and control for improved
performance"
E Mesbahi, Prof A P Roskilly and Dr M Atlar (University of Newcastle upon Tyne, UK) |
21st Century Cruise Ship
London, 15-16 April 1999
Keynote address
R Vie (Technical Services Manager, Newbuildings, P&O/PRINCESS CRUISES, UK) |
"Power and propulsion systems. Hydrodynamic aspects of Mermaid
propulsion system "
P Kron and L Holmström (Kamewa Pod Propulsion, MermaidTM, Sweden) |
"The intercooled recuperated WR-21 gas turbine – the future of cruise
ship propulsion"
G W Lloyd (Rolls-Royce, UK) |
"Overview of electric driven podded propulsor systems"
E Y Ylinen (Kvaerner Masa Yards Inc., Helsinki New Shipyard, Finland) |
"Development of passenger cruise ships for the next century, based on new
conceptual thinking and gas turbine machinery"
M Kanerva (Deltamarin Ltd, Finland) |
"Diesel engines versus gas turbines in cruise vessel propulsion: comparison
seen from a diesel engine manufacturer's point of view"
H W Koehler (MAN B&W Diesel Aktiengesellschaft, Germany) |
"Power quality measurements of ships with different electrical systems"
S Iden (Siemens AG, Germany) and Prof Dr-Ing G Vaupel (University of Applied Sciences
Hamburg, Germany) |
"Optimum power generation on cruise ships"
T Henriksson (Wärtsilä NSD Finland Oy, Finland) |
"New cruise vessel concepts. Trimaran cruise liners"
Dr A R Greig and Dr R W G Bucknall (University College London, UK) |
"Cruise ships: a fleet in transition"
Dr E S Tzannatos (University of Piraeus, Greece) |
"A classification approach towards innovation"
B J Twomey and A C Messer (Lloyd's Register of Shipping, UK) |
"Auxiliary/ancillary systems. The marine evacuation chute for cruise
ships of the 21st Century"
D T Haylock (DBC Marine Safety Systems, Canada) |
"Way-finding behaviour and technical guidance systems"
Dr L C Boer and A W Vredeveldt (TNO, The Netherlands) |
"The 21st century cruise ship and the problem of security"
Brigadier (Retd) B A H Parritt CBE (International Maritime Security (IMS), UK) |
"Passenger flow logistics: new solutions for a new millennium"
B Stenwall (University of Helsinki, Finland) |
"Cruise ship dry dock/remodeling"
L A Nordin (Princess Cruises, USA) |
"Power and propulsion systems. Design and evaluation of ship's power
plants"
Ir G J Meijer, Ir J van Vugt, Ing W Folkersma (TNO-Centre for Mechanical Engineering, The
Netherlands) and Dr U Nienhuis (Netherlands Institute for Maritime Research, The
Netherlands) |
"Development and merits of a combined tunnel and azimuth thruster
(combi-thruster)"
R Garen and J T Johannessen (Ulstein Propeller AS, Norway) |
"Auxiliary/ancillary systems. Prevention is better
than cure: the need for proper HVAC cleaning"
C Booth (System Hygienics Limited, UK) |
Computers and Ships
London, 11-12 May 1999
"Keynote address: Practical application of virtual
reality technologies for ship design and build"
J L Martin (Marconi Marine (VSEL), UK) |
"Ship design. Use of CAD in the design and production of
naval surface ships: lessons learned and prospects from DCN experience on SAWARI II
frigates "
D Person, V Martinot-Lagarde and M Tanguy (DCN Lorient, France) |
"Machinery and equipment design and manufacturing.
Synthesis GETOL control and supply systems"
Prof G L Degtyarev, G L Romanenko, Prof L G Romanenko and Prof V S Tereshchuk (Kazan State
Technical University, Russia) |
"Electric plant interface conversion using a
programmable logic controller"
M J Hanak, P Tahopoulos, T S Scherer and A S Freedner (Naval Surface Warfare Center, USA)
|
"Naval machinery automation systems – past, present
and future"
N H Hogg (Vosper Thornycroft Controls Ltd, UK) |
"Simulation of the electrical drive system of
ships"
S Iden (Siemens AG, Germany) and Prof Dr-Ing G H Vaupel (University of Applied
Sciences Hamburg, Germany) |
"Data acquisition and storage: performance monitoring
and analysis. FOCUS: a naval damage control
system"
S D Boyd (Defence Science & Technology Organisation, Australian Department of Defence,
Australia) |
"Utilising the rotational motion of machinery in a high
resolution data acquisition system"
G O Chandroth and Dr A J C Sharkey (University of Sheffield, UK) |
"Automation systems in modern diesel-electric marine
applications"
D Gondouin (Alstom Drives and Controls, France) |
"Computer-based condition monitoring of an electricity
generating plant"
Dr K D H Bob-Manuel and H I Hart (Rivers State University of Science and Technology,
Nigeria)
and E A Ogbonnaya (Nigerian Navy, Nigeria) |
"Ship operation and fleet support. The technology used for development of the COSCO shipping information
system"
Prof G S W Wu (Qingdao Ocean Shipping Mariner College, P.R. China) and Prof D Huang (China
Ocean Shipping (Group) Company, P.R. China) |
"Practical integrated maintenance and diagnostics for
medium and slow speed diesel engines"
C L Haller (MPR Associates Inc, USA) and E P Kelleher (Dynalco Controls, USA) |
"Ship operation and fleet support"
N Padmanabhanl (Teledata Informatics Ltd, India) |
"Machinery and equipment design and manufacturing.
Optimum design of ship corrosion protection using computer
simulation"
Dr R A Adey (Computational Mechanics BEASY, UK) and P Y Hang (DSO National Laboratories,
Singapore) |
"A model-reference neural autopilot for ships"
A G M Zirilli, Prof G N Roberts (University of Wales College, UK), Prof A Tiano
(University
of Pavia, Italy) and Dr R Sutton (University of Plymouth, UK) |
"Data acquisition and storage: performance monitoring
and analysis.The Maritime Black Box (MBB): a shipborne
voyage data recorder dedicated to maritime accident investigation"
P Lahalle (Thomson-CSF DETEXIS, France) |
"Session 4: Ship operation and fleet
support. IT support for ships' computer
equipment"
D A Rice (Broadgate Ltd, UK) |
"Year 2000 compliance for vessels"
P J Wells (Lothian Shipping Services (London) Limited, UK) |
|
 |
home
hq
contact us
annual reports
officers
branches
YMP
SSG
Guild of Benevolence
royal charter
(373kb) PDF
PR & Marketing
|
